Dektite Premium EPDM
The original DEKS™ Dektite Premium EPDM range is ideal for flashing pipe penetrations on metal roofs and wall claddings. The malleable aluminium base easily moulds to almost all roofing profiles, and the low-profile EPDM boot handles the steepest roofs effortlessly.
- Roof Pitch: 0-45°
- Penetration range: 0 – 508mm
- Application: metal roofs and wall claddings
- Temperature range: -50˚C to 115˚C
- Resistance: UV rated
- Material/Colour: Black EPDM polymer rubber, edged with a corrosion-resistant aluminium band
Dektite polymer flashings have been tested and comply with applicable Australian and New Zealand Standards. For guidance on good flashing design and installation methods, refer to the New Zealand Metal Roof Manufacturers Association Code of Practice and NZBC E2/AS1.
Brochure
| Nominal Pipe Diameter (mm) | Base Size (mm) | Part Number | Material / Colour |
|---|---|---|---|
| 0-35 | 101×101 | DFE100B | EPDM / Black |
| 0-35 | 101×101 | DFE100G | EPDM / Grey |
| 5-55 | 139×139 | DFE101B | EPDM / Black |
| 5-55 | 139 x 139 | DFE101G | EPDM / Grey |
| 50-70 | 181×181 | DFE102BA | EPDM / Black |
| 50-70 | 181×181 | DFE102GA | EPDM / Grey |
| 5-127 | 220×220 | DFE103B | EPDM / Black |
| 5-127 | 220×220 | DFE103G | EPDM / Grey |
| 75-175 | 280×280 | DFE104B | EPDM / Black |
| 75-175 | 280×280 | DFE104G | EPDM / Grey |
| 100-200 | 308×308 | DFE105B | EPDM / Black |
| 100-200 | 308×308 | DFE105G | EPDM / Grey |
| 125-230 | 363×363 | DFE106B | EPDM / Black |
| 125-230 | 363×363 | DFE106G | EPDM / Grey |
| 150-300 | 456×456 | DFE107B | EPDM / Black |
| 150-300 | 456×456 | DFE107G | EPDM / Grey |
| 170-355 | 496×496 | DFE108B | EPDM / Black |
| 170-355 | 496×496 | DFE108G | EPDM / Grey |
| 230-508 | 681×681 | DFE109B | EPDM / Black |
| 230-508 | 681×681 | DFE109G | EPDM / Grey |